Technical Data Sheets TYGLAS VC Y0533/031 Tyglas VC is a glassfibre fabric coated on both faces with a temperature resistant inorganic aluminised polymer system. Product Details Weave 4 End Satin Weight 450 g/m² (coated) Thickness 0.35mm Tensile Strength Warp 850 N/cm Weft 550N/cm Temperature Resistance -20°C to + 550°C Coating (continuous use) 160°C maximum Roll length 50 meters (nominal) Width 1000mm or 1200mm Other widths to customer order. Meets Airbus Industry Fire Smoke -Toxicity specification for non metallic parts inside Airbus Commercial aircraft -ATS- 1000.001/ABD 00331 Issue 5. Meets the requirements of a class O surface as defined in Approved Document 13 to Building Regulations 1991. Two hour integrity and stability to BS 476 Part 22. Resistance to:- Water Good resistance. The coating will not deteriorate under normal conditions of use. Classed 'Showerpoof' when tested in accordance with BS5066 WIRA Shower test. Oil and Grease Fabric surface will not absorb oil or grease. Such substance can be easily wiped off. Steam Resistance is fair but constant long term exposure is not recommended. Acids/Alkalies Fabric is not recommended for use in strong acidic or alkaline conditions. If the fabric is to be used in a harsh chemical environment, it is recommended that a small sample of the fabrics is tested before use. Applications: Valve covers Insulation Mattresses Flexible connectors Welding/spark protection-available in the form of rolls and made up blankets/cover Fire Barriers Smoke Curtains Fabrics Contain no Asbestos or Respirable Fibres Back